Buy Kreg DB110 Foreman 3 4-Horsepower Electric Semi-Automatic Pocket Hole Machine or Kreg DB55 Foreman 3 4 HP Semi-Automatic Pneumatic Pocket Hole Machine or Kreg DK1100 FE 1-1 2 Horsepower Floor Electric Fully-Automatic Single Spindle Pocket Machine.
Kreg DB110 Foreman 3/4 Horsepower Electric Semi$795.00Semi-Automatic, FOREMAN Pocket Hole Machine. When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features an electric drill motor and an adjustable clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion activates the 3/4 hp drill motor and throws the clamping cylinder.
Kreg DB55 Foreman 3/4 HP Semi Automatic Pneumatic$795.00The semi-automatic FOREMAN features an electric drill motor and an adjustable clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion activates the 3/4 hp drill motor and throws the clamping cylinder. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position.The Kreg Foreman 3/4-Horsepower Semi-Automatic Pneumatic Pocket Hole Machine features a pneumatic drill motor and an automatically adjusting air clamping cylinder.
Kreg DK1100 FE 1 1/2 Horsepower Floor Electric Fully$2,795.00The DK1100 FE is a floor-standing electric, fully-automatic pocket hole boring machine. 110VAC is required to power the drill spindle of the machine and 100 psi of air pressure is needed to cycle the hold-down clamp and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to seat flushly in the bottom of the pocket and the hole to be plugged with wooden dowel.
Kreg DK3100 1 1/2 Horsepower Floor Electric Fully$3,595.00Drills two pocket holes in one machine cycle. 3/4-Inch, 1-Inch and 1-3/4-Inch on-center spacings. Fast, 1 second cycle time. Quiet and powerful. The H6828 is the only pocket hole machine on the market that has the ability to drill two pocket holes in one machine cycle across rails of varying widths. Drill spindles in the machine are fixed at 3/4-Inch, 1-Inch and 1-3/4-Inch on center allowing it to drill today's most common rail widths of 1-1/2-Inch up to 3-3/4-Inch in one machine cycle.
Kreg DK1100 TP 1 1/4 Horsepower Bench Pnuematic Fully$2,595.00The DK1100 TP is a benchtop, entirely pneumatic powered, fully-automatic pocket hole boring machine. The only difference from the FP model is that it is contained in a short, benchtop cabinet that allows it to be built into a workbench or transported from your shop to the worksite. 110-120 psi is recommended to power the direct drive air motor, hold-down clamp and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole.
Kreg DK1100 FP 1 1/4 Horsepower Floor Pnuematic Fully$2,795.00The DK1100 FP is a floor-standing, entirely pneumatic powered, fully-automatic pocket hole boring machine. 110-120 psi is recommended to power the direct drive air motor, hold-down clamp and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to seat flushly in the bottom of the pocket and the hole to be plugged with wooden dowel.
Kreg DK5100 3/4 Horsepower 5 Spindle Pneumatic Pocket$8,495.00New to the market, the DK5100 multi-spindle pocket hole machine drills up to five pocket holes in one machine cycle. The machine contains 5 separate drill motors mounted 6 on center. Each drill motor can be individually actuated for the ability to drill one, two, three, four, or five pocket holes at a time.
Best Sellers
New Releases